FREE delivery when you spend over £165

AA-First Font 10 Wall Mounted Fountain

Wall Mounted Water Fountain





Product Details

AA-First Premium Wall Mounted Water Fountain. With contactless options and the ability to be connected to an under counter chiller, it's perfect for your use case.

 

  • The FONT10 Offers a simple solution to a growing need for accessible drinking water in schools and sports centres amongst other locations
  • The FONT10 comes with a non stick “joy stick”, instead of a push button bubbler
  • It is suitable for indoor or covered outdoor installation
  • It is set up for mains drainage. The FONT10 simply connects straight into the mains supply and does not include a chilling unit as standard
  • To increase/decrease the Bubbler water flow remove the outer Bubbler spout and then adjust with a screw driver
  • The FONT10 provides ambient water. It can be connected to an Under-sink Chiller to provide chilled water

 

For additional Hygiene add a Contactless Tap from the options

Please note: Contactless Taps are powered by two 3V batteries with a tested life span of 86.000 Solenoid activations.

Contactless taps are programmed to stop dispensing after 6 seconds. If that is insufficient you can place your hand again over the sensor to continue dispensing.

 

Add an Under Counter Unit from the options to provide Chilled Water

Please note: Under Counter Unit requires a power supply.

  • Cold Water Tank: Stainless Steel, 1.95 Litres
  • Cooling Performance: 11.5 Litres per hour below 10˚C at influent water temperature of 20˚C
  • Thermostat: 4˚C to 10˚C Factory set (Do not adjust)
  • Refrigeration System: R-600a, 16g
  • Power Supply: 220-240Volt, 50/60 Hz
  • Inlet and Outlet Pipes: ¼” Push Fit
  • Ventilation: allow for 50 mm clearance on all sides
  • For best performance please ensure installation has adequate ventilation. Poor ventilation will adversely affect the performance of this product and may result in premature failure

 

    Download brochure

    Need Help Choosing The Right Filter Or Maintenance Options?

    Check the FAQ's below and if you are still stuck please feel free to call our helpful sales team on: 0333 313 4345

    • Which filter should I choose for this machine?

      If the machine you are choosing dispenses cold or ambient water only, then you will need any of the Cold Water Filters.

      If the machine you are choosing dispenses hot & cold water, then you will need any of the Hot & Cold Water Filters that include a Scale Inhibitor.

      If the machine you are choosing have specific filters to choose from, these will be the only ones available in the dropdown box.

    • What is the difference between carbon block & GAC?

      While the GAC filters are adequate and have a slightly quicker throughput. A Carbon Block filter does a much more thorough job of filtering your water.

    • Why do I need a maintenance contract & what does FCSS/FSMA/B-FSMA stand for?

      Plumbed in Water Boilers, Water Coolers & Fountains need to have their filters changed and tanks sanitised twice per year. Water Boilers also need to be descaled. You can either buy the filters and cleaning equipment to do this your self or take out a service contract and have it done professionally.

      FCSS - Filter Change Service & Sanitisation
      Includes 2 filter changes & 2 sanitisations per year.

      FSMA - Full Service Maintenance Agreement
      Includes all callouts, parts & labour, 2 filter changes & 2 sanitisations per year.

      B-FSMA - Boiler Full Service Maintenance Agreement
      Includes all callouts, parts & labour, 1 descale, 2 filter changes & 2 sanitisations per year.